Making A Printer Wireless Is Not Complicated
Making a printer wireless is a common desire for many computer users. Usually, the need arises when two or more computers are required to share the same printer. Sometimes, there is simply a need to print documents somewhere other than where a computer is located. Luckily, the most common solution is rather easy to apply. To avoid all the hassle of making a printer wireless, get a wireless printer. Go read a Brother MFC-490CW review for that purpose.
Typically, the best way to share printers is by using a device known as a wireless print server. These can be purchased from most any computer peripheral provider and can make nearly any USB printer wireless. At that point, the printer can then be used with one or several computers just about anywhere around the home or office.
To begin with, you will require a USB printer, an Ethernet cable and a wireless print server. The most crucial matter to remember is to be sure that your server is completely compatible with both the printer and your wireless network. This is information you can check with your supplier or at the manufacturer's web site. You can also buy a wireless printer, like Brother MFC-490CW.
Most servers are not designed to operate with multifunction printers. Whenever you might require a printer with certain functions such as scanning, you need to use a server with support for those particular capabilities.
Servers normally have elaborate documentation as well as manuals that will deal with all the details of the installation. The majority of server manufacturers would have supplementary troubleshooting data at the company's website. All the same, in most instances, the procedure is very simple and the supplied information ought to be enough.
The server will come in two or more separate units. There will be one unit at the printer location and another unit at each individual computer station. The first step is usually to connect the printer with the server using a USB cable. There will also be an AC adapter that connects to your power supply.
On the computer, you need to connect up an Ethernet cable to the print server. When you carry out this procedure, carefully follow with all directions and diagrams. Once all of the wires are in position, you will install the server software.
After you put in the CD, an installation program will direct you to configure the network, install the necessary drivers and to set up your password to conclude the procedure.
